🎉 Up to 70% Off Selected ItemsShop Sale
Juniper ACX-MIC-4COC3-1COC12CE Interface Card
[shortdesc]
- Multirate Circuit Emulation MIC
- 4-port channelized OC3/STM1 or 1-port channelized OC12/STM4
- Channelized down to DS0
- for ACX4000
[properties]
| Properties | Juniper ACX-MIC-4COC3-1COC12CE |
| Description | Multirate Circuit Emulation Modular Interface Card for Juniper ACX4000 Series with four channelized OC3/STM1 ports or one channelized OC12/STM4 port, supporting channelization down to DS0. |
| Product Family | ACX4000 Series |
| Product Type | Modular Interface Card |
| Ports | Four OC3/STM1 ports Rate-selectable using one of the following rates: 4-port OC3/STM1 1-port OC12/STM4 One channelized OC12/STM4 port (down to DS0) |
| Weight (lb/kg) | 1.67 lb (0.76 kg) |
| Power requirement without PoE | 2.21 A @ 12 V (26.56 W) |
[/properties][specifications]
| Specifications | Juniper ACX-MIC-4COC3-1COC12CE |
| Configurations | SONET or SDH is configurable on a MIC level SONET channelization: - 4 OC3 channels - 336 DS1 channels - 2016 DS0 channels (combination of nxDS0) SDH channelization: - 4 STM1 channels - 252 E1 channels - 2016 DS0 channels (combination of nxDS0) |
| Software Features | Per-MIC SONET/SDH framing Internal and loop clocking Encapsulations: - Pseudowire Emulation Edge-to-Edge (PWE3) Architecture (RFC 3985) - Requirements for Pseudowire Emulation Edge-to-Edge (PWE3) (RFC 3916) - Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) (RFC 4553) - Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet Switched Network (CESoPSN) (RFC 5086) - Pseudowire Emulation Edge-to-Edge (PWE3) Control Word for Use over an MPLS PSN (RFC 4385) |
| Operating temperature | -40° to 149° F (-40° to 65° C) |
| Humidity | 95% RH noncondensing |
| Safety Approvals | CAN/CSA-C22.2 No. 60950-1 UL 60950-1 EN 60950-1 IEC 60950-1CB Scheme EN 60825-1 |
| EMC | AS/NZS CISPR22 Class A EN55022 Class A VCCI Class A FCC Part 15 Class A IECS-003 Issue 4 BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions KN 22, Class A CISPR 32/EN55032: 2012 European Radiated Emissions Class A EN-61000-4-6 Low Frequency Common Immunity EN-61000-4-11 Voltage Dips and Sags CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics |
| ETSI (European Telecommunications Standardization Institute) | EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility Requirements ETSI EN 300 019-2-1 (2000) Storage, Class T1.2 ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3 ETSI EN 300 019-2-4 (2003) Stationary Use at Non-Weather Protected Locations, Class 4.1 ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment |
| NEBS | SR-3580 NEBS Criteria Levels (Level 3 Compliance) GR-63-CORE: NEBS, Physical Protection GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant) GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) |
| Telecomm Compliance | T1 and XDSL Interfaces FCC Part 68 (T1 Only) Industry Canada CS-03 JATE Green Book E1 Interface TBR 12/13 ACA TS016 G.703 RTTE Directive 1995/5/EC Device management: NETCONF, CLI, SNMP v1/v2/v3 End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS) Device and service-level fault management Device and service-level performance management |
| Metro Ethernet Forum (MEF) | MEF CE2.0 compliant |
[/specifications]
Juniper ACX-MIC-4COC3-1COC12CE Modular Interface Card
Juniper ACX-MIC-4COC3-1COC12CE is a multirate circuit emulation Modular Interface Card designed for the Juniper ACX4000 Series. It supports four channelized OC3/STM1 ports or one channelized OC12/STM4 port with channelization down to DS0, making it suitable for circuit emulation applications in metro and access network environments.
[shortdesc]
- Multirate Circuit Emulation MIC
- 4-port channelized OC3/STM1 or 1-port channelized OC12/STM4
- Channelized down to DS0
- for ACX4000
[properties]
| Properties | Juniper ACX-MIC-4COC3-1COC12CE |
| Description | Multirate Circuit Emulation Modular Interface Card for Juniper ACX4000 Series with four channelized OC3/STM1 ports or one channelized OC12/STM4 port, supporting channelization down to DS0. |
| Product Family | ACX4000 Series |
| Product Type | Modular Interface Card |
| Ports | Four OC3/STM1 ports Rate-selectable using one of the following rates: 4-port OC3/STM1 1-port OC12/STM4 One channelized OC12/STM4 port (down to DS0) |
| Weight (lb/kg) | 1.67 lb (0.76 kg) |
| Power requirement without PoE | 2.21 A @ 12 V (26.56 W) |
[/properties][specifications]
| Specifications | Juniper ACX-MIC-4COC3-1COC12CE |
| Configurations | SONET or SDH is configurable on a MIC level SONET channelization: - 4 OC3 channels - 336 DS1 channels - 2016 DS0 channels (combination of nxDS0) SDH channelization: - 4 STM1 channels - 252 E1 channels - 2016 DS0 channels (combination of nxDS0) |
| Software Features | Per-MIC SONET/SDH framing Internal and loop clocking Encapsulations: - Pseudowire Emulation Edge-to-Edge (PWE3) Architecture (RFC 3985) - Requirements for Pseudowire Emulation Edge-to-Edge (PWE3) (RFC 3916) - Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) (RFC 4553) - Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet Switched Network (CESoPSN) (RFC 5086) - Pseudowire Emulation Edge-to-Edge (PWE3) Control Word for Use over an MPLS PSN (RFC 4385) |
| Operating temperature | -40° to 149° F (-40° to 65° C) |
| Humidity | 95% RH noncondensing |
| Safety Approvals | CAN/CSA-C22.2 No. 60950-1 UL 60950-1 EN 60950-1 IEC 60950-1CB Scheme EN 60825-1 |
| EMC | AS/NZS CISPR22 Class A EN55022 Class A VCCI Class A FCC Part 15 Class A IECS-003 Issue 4 BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions KN 22, Class A CISPR 32/EN55032: 2012 European Radiated Emissions Class A EN-61000-4-6 Low Frequency Common Immunity EN-61000-4-11 Voltage Dips and Sags CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics |
| ETSI (European Telecommunications Standardization Institute) | EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility Requirements ETSI EN 300 019-2-1 (2000) Storage, Class T1.2 ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3 ETSI EN 300 019-2-4 (2003) Stationary Use at Non-Weather Protected Locations, Class 4.1 ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment |
| NEBS | SR-3580 NEBS Criteria Levels (Level 3 Compliance) GR-63-CORE: NEBS, Physical Protection GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant) GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) |
| Telecomm Compliance | T1 and XDSL Interfaces FCC Part 68 (T1 Only) Industry Canada CS-03 JATE Green Book E1 Interface TBR 12/13 ACA TS016 G.703 RTTE Directive 1995/5/EC Device management: NETCONF, CLI, SNMP v1/v2/v3 End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS) Device and service-level fault management Device and service-level performance management |
| Metro Ethernet Forum (MEF) | MEF CE2.0 compliant |
[/specifications]
Juniper ACX-MIC-4COC3-1COC12CE Modular Interface Card
Juniper ACX-MIC-4COC3-1COC12CE is a multirate circuit emulation Modular Interface Card designed for the Juniper ACX4000 Series. It supports four channelized OC3/STM1 ports or one channelized OC12/STM4 port with channelization down to DS0, making it suitable for circuit emulation applications in metro and access network environments.
$7,084.70
Original: $20,242.00
-65%Juniper ACX-MIC-4COC3-1COC12CE Interface Card—
$20,242.00
$7,084.70Description
[shortdesc]
- Multirate Circuit Emulation MIC
- 4-port channelized OC3/STM1 or 1-port channelized OC12/STM4
- Channelized down to DS0
- for ACX4000
[properties]
| Properties | Juniper ACX-MIC-4COC3-1COC12CE |
| Description | Multirate Circuit Emulation Modular Interface Card for Juniper ACX4000 Series with four channelized OC3/STM1 ports or one channelized OC12/STM4 port, supporting channelization down to DS0. |
| Product Family | ACX4000 Series |
| Product Type | Modular Interface Card |
| Ports | Four OC3/STM1 ports Rate-selectable using one of the following rates: 4-port OC3/STM1 1-port OC12/STM4 One channelized OC12/STM4 port (down to DS0) |
| Weight (lb/kg) | 1.67 lb (0.76 kg) |
| Power requirement without PoE | 2.21 A @ 12 V (26.56 W) |
[/properties][specifications]
| Specifications | Juniper ACX-MIC-4COC3-1COC12CE |
| Configurations | SONET or SDH is configurable on a MIC level SONET channelization: - 4 OC3 channels - 336 DS1 channels - 2016 DS0 channels (combination of nxDS0) SDH channelization: - 4 STM1 channels - 252 E1 channels - 2016 DS0 channels (combination of nxDS0) |
| Software Features | Per-MIC SONET/SDH framing Internal and loop clocking Encapsulations: - Pseudowire Emulation Edge-to-Edge (PWE3) Architecture (RFC 3985) - Requirements for Pseudowire Emulation Edge-to-Edge (PWE3) (RFC 3916) - Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) (RFC 4553) - Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet Switched Network (CESoPSN) (RFC 5086) - Pseudowire Emulation Edge-to-Edge (PWE3) Control Word for Use over an MPLS PSN (RFC 4385) |
| Operating temperature | -40° to 149° F (-40° to 65° C) |
| Humidity | 95% RH noncondensing |
| Safety Approvals | CAN/CSA-C22.2 No. 60950-1 UL 60950-1 EN 60950-1 IEC 60950-1CB Scheme EN 60825-1 |
| EMC | AS/NZS CISPR22 Class A EN55022 Class A VCCI Class A FCC Part 15 Class A IECS-003 Issue 4 BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions KN 22, Class A CISPR 32/EN55032: 2012 European Radiated Emissions Class A EN-61000-4-6 Low Frequency Common Immunity EN-61000-4-11 Voltage Dips and Sags CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics |
| ETSI (European Telecommunications Standardization Institute) | EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility Requirements ETSI EN 300 019-2-1 (2000) Storage, Class T1.2 ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3 ETSI EN 300 019-2-4 (2003) Stationary Use at Non-Weather Protected Locations, Class 4.1 ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment |
| NEBS | SR-3580 NEBS Criteria Levels (Level 3 Compliance) GR-63-CORE: NEBS, Physical Protection GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant) GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) |
| Telecomm Compliance | T1 and XDSL Interfaces FCC Part 68 (T1 Only) Industry Canada CS-03 JATE Green Book E1 Interface TBR 12/13 ACA TS016 G.703 RTTE Directive 1995/5/EC Device management: NETCONF, CLI, SNMP v1/v2/v3 End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS) Device and service-level fault management Device and service-level performance management |
| Metro Ethernet Forum (MEF) | MEF CE2.0 compliant |
[/specifications]
Juniper ACX-MIC-4COC3-1COC12CE Modular Interface Card
Juniper ACX-MIC-4COC3-1COC12CE is a multirate circuit emulation Modular Interface Card designed for the Juniper ACX4000 Series. It supports four channelized OC3/STM1 ports or one channelized OC12/STM4 port with channelization down to DS0, making it suitable for circuit emulation applications in metro and access network environments.
