🎉 Up to 70% Off Selected ItemsShop Sale
Juniper ACX-MIC-16CHE1-T1-CE Interface Card
[shortdesc]
- Converged Access Gateway Base Unit
- 16-port channelized T1/E1 MIC
- Channelized E1 down to DS0
- RJ48 connector
- for ACX4000
- Supported on Fortius-M only
[properties]
| Properties | Juniper ACX-MIC-16CHE1-T1-CE |
| Description | 16-port channelized T1/E1 Modular Interface Card with RJ48 connector for Juniper ACX4000 Series, supporting channelized E1 down to DS0. Supported on Fortius-M only. |
| Product Family | ACX4000 Series |
| Product Type | Modular Interface Card |
| Ports | 16 E1 or T1 ports Per-MIC E1/T1 framing DS1 channelization per MIC: - 1 DS1 channel - 24 DS0 channels E1 channelization per PIC: - 1 E1 channel - 32 DS0 channels |
| Weight (lb/kg) | 1.57 lb (0.71 kg) |
| Power requirement | 2.21 A @ 12 V (26.55 W) |
[/properties][specifications]
| Specifications | Juniper ACX-MIC-16CHE1-T1-CE |
| Software Features | Full bit error rate test (BERT) DS1 and E1 interfaces are selectable on a per-port granularity Per-port framing is not supported You can configure the following framing modes using the CLI: - T1SF, ESF, D4/superframe, ESF (extended superframe) - E1G704, G704no-crc4, unframed Local, remote, and per-port loopback diagnostics Encapsulations: - Pseudowire Emulation Edge to Edge (PWE3) Architecture (RFC 3985) - Requirements for Pseudowire Emulation Edge to Edge (PWE3) (RFC 3916) - Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) (RFC 4553) - Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet-Switched Network (CESoPSN) (RFC 5086) - Pseudowire Emulation Edge to Edge (PWE3) Control Word for Use over an MPLS PSN (RFC 4385) |
| Operating temperature | -40° to 149° F (-40° to 65° C) |
| Humidity | 95% RH noncondensing |
| Safety Approvals | CAN/CSA-C22.2 No. 60950-1 UL 60950-1 EN 60950-1 IEC 60950-1CB Scheme EN 60825-1 |
| EMC | AS/NZS CISPR22 Class A EN55022 Class A VCCI Class A FCC Part 15 Class A IECS-003 Issue 4 BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions KN 22, Class A CISPR 32/EN55032: 2012 European Radiated Emissions Class A EN-61000-4-6 Low Frequency Common Immunity EN-61000-4-11 Voltage Dips and Sags CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics |
| ETSI (European Telecommunications Standardization Institute) | EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility Requirements ETSI EN 300 019-2-1 (2000) Storage, Class T1.2 ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3 ETSI EN 300 019-2-4 (2003) Stationary Use at Non-Weather Protected Locations, Class 4.1 ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment |
| NEBS | SR-3580 NEBS Criteria Levels (Level 3 Compliance) GR-63-CORE: NEBS, Physical Protection GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant) GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) |
| Telecomm Compliance | T1 and XDSL Interfaces FCC Part 68 (T1 Only) Industry Canada CS-03 JATE Green Book E1 Interface TBR 12/13 ACA TS016 G.703 RTTE Directive 1995/5/EC Device management: NETCONF, CLI, SNMP v1/v2/v3 End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS) Device and service-level fault management Device and service-level performance management |
| Metro Ethernet Forum (MEF) | MEF CE2.0 compliant |
[/specifications]
Juniper ACX-MIC-16CHE1-T1-CE Modular Interface Card
Juniper ACX-MIC-16CHE1-T1-CE is a 16-port channelized T1/E1 Modular Interface Card designed for the Juniper ACX4000 Series. It supports channelized E1 connectivity down to DS0 through an RJ48 interface, making it suitable for metro and access network deployments that require flexible circuit-based service delivery. This MIC is supported on Fortius-M only.
[shortdesc]
- Converged Access Gateway Base Unit
- 16-port channelized T1/E1 MIC
- Channelized E1 down to DS0
- RJ48 connector
- for ACX4000
- Supported on Fortius-M only
[properties]
| Properties | Juniper ACX-MIC-16CHE1-T1-CE |
| Description | 16-port channelized T1/E1 Modular Interface Card with RJ48 connector for Juniper ACX4000 Series, supporting channelized E1 down to DS0. Supported on Fortius-M only. |
| Product Family | ACX4000 Series |
| Product Type | Modular Interface Card |
| Ports | 16 E1 or T1 ports Per-MIC E1/T1 framing DS1 channelization per MIC: - 1 DS1 channel - 24 DS0 channels E1 channelization per PIC: - 1 E1 channel - 32 DS0 channels |
| Weight (lb/kg) | 1.57 lb (0.71 kg) |
| Power requirement | 2.21 A @ 12 V (26.55 W) |
[/properties][specifications]
| Specifications | Juniper ACX-MIC-16CHE1-T1-CE |
| Software Features | Full bit error rate test (BERT) DS1 and E1 interfaces are selectable on a per-port granularity Per-port framing is not supported You can configure the following framing modes using the CLI: - T1SF, ESF, D4/superframe, ESF (extended superframe) - E1G704, G704no-crc4, unframed Local, remote, and per-port loopback diagnostics Encapsulations: - Pseudowire Emulation Edge to Edge (PWE3) Architecture (RFC 3985) - Requirements for Pseudowire Emulation Edge to Edge (PWE3) (RFC 3916) - Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) (RFC 4553) - Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet-Switched Network (CESoPSN) (RFC 5086) - Pseudowire Emulation Edge to Edge (PWE3) Control Word for Use over an MPLS PSN (RFC 4385) |
| Operating temperature | -40° to 149° F (-40° to 65° C) |
| Humidity | 95% RH noncondensing |
| Safety Approvals | CAN/CSA-C22.2 No. 60950-1 UL 60950-1 EN 60950-1 IEC 60950-1CB Scheme EN 60825-1 |
| EMC | AS/NZS CISPR22 Class A EN55022 Class A VCCI Class A FCC Part 15 Class A IECS-003 Issue 4 BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions KN 22, Class A CISPR 32/EN55032: 2012 European Radiated Emissions Class A EN-61000-4-6 Low Frequency Common Immunity EN-61000-4-11 Voltage Dips and Sags CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics |
| ETSI (European Telecommunications Standardization Institute) | EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility Requirements ETSI EN 300 019-2-1 (2000) Storage, Class T1.2 ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3 ETSI EN 300 019-2-4 (2003) Stationary Use at Non-Weather Protected Locations, Class 4.1 ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment |
| NEBS | SR-3580 NEBS Criteria Levels (Level 3 Compliance) GR-63-CORE: NEBS, Physical Protection GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant) GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) |
| Telecomm Compliance | T1 and XDSL Interfaces FCC Part 68 (T1 Only) Industry Canada CS-03 JATE Green Book E1 Interface TBR 12/13 ACA TS016 G.703 RTTE Directive 1995/5/EC Device management: NETCONF, CLI, SNMP v1/v2/v3 End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS) Device and service-level fault management Device and service-level performance management |
| Metro Ethernet Forum (MEF) | MEF CE2.0 compliant |
[/specifications]
Juniper ACX-MIC-16CHE1-T1-CE Modular Interface Card
Juniper ACX-MIC-16CHE1-T1-CE is a 16-port channelized T1/E1 Modular Interface Card designed for the Juniper ACX4000 Series. It supports channelized E1 connectivity down to DS0 through an RJ48 interface, making it suitable for metro and access network deployments that require flexible circuit-based service delivery. This MIC is supported on Fortius-M only.
$3,556.35
Original: $10,161.00
-65%Juniper ACX-MIC-16CHE1-T1-CE Interface Card—
$10,161.00
$3,556.35Description
[shortdesc]
- Converged Access Gateway Base Unit
- 16-port channelized T1/E1 MIC
- Channelized E1 down to DS0
- RJ48 connector
- for ACX4000
- Supported on Fortius-M only
[properties]
| Properties | Juniper ACX-MIC-16CHE1-T1-CE |
| Description | 16-port channelized T1/E1 Modular Interface Card with RJ48 connector for Juniper ACX4000 Series, supporting channelized E1 down to DS0. Supported on Fortius-M only. |
| Product Family | ACX4000 Series |
| Product Type | Modular Interface Card |
| Ports | 16 E1 or T1 ports Per-MIC E1/T1 framing DS1 channelization per MIC: - 1 DS1 channel - 24 DS0 channels E1 channelization per PIC: - 1 E1 channel - 32 DS0 channels |
| Weight (lb/kg) | 1.57 lb (0.71 kg) |
| Power requirement | 2.21 A @ 12 V (26.55 W) |
[/properties][specifications]
| Specifications | Juniper ACX-MIC-16CHE1-T1-CE |
| Software Features | Full bit error rate test (BERT) DS1 and E1 interfaces are selectable on a per-port granularity Per-port framing is not supported You can configure the following framing modes using the CLI: - T1SF, ESF, D4/superframe, ESF (extended superframe) - E1G704, G704no-crc4, unframed Local, remote, and per-port loopback diagnostics Encapsulations: - Pseudowire Emulation Edge to Edge (PWE3) Architecture (RFC 3985) - Requirements for Pseudowire Emulation Edge to Edge (PWE3) (RFC 3916) - Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP) (RFC 4553) - Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet-Switched Network (CESoPSN) (RFC 5086) - Pseudowire Emulation Edge to Edge (PWE3) Control Word for Use over an MPLS PSN (RFC 4385) |
| Operating temperature | -40° to 149° F (-40° to 65° C) |
| Humidity | 95% RH noncondensing |
| Safety Approvals | CAN/CSA-C22.2 No. 60950-1 UL 60950-1 EN 60950-1 IEC 60950-1CB Scheme EN 60825-1 |
| EMC | AS/NZS CISPR22 Class A EN55022 Class A VCCI Class A FCC Part 15 Class A IECS-003 Issue 4 BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions KN 22, Class A CISPR 32/EN55032: 2012 European Radiated Emissions Class A EN-61000-4-6 Low Frequency Common Immunity EN-61000-4-11 Voltage Dips and Sags CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics |
| ETSI (European Telecommunications Standardization Institute) | EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility Requirements ETSI EN 300 019-2-1 (2000) Storage, Class T1.2 ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3 ETSI EN 300 019-2-4 (2003) Stationary Use at Non-Weather Protected Locations, Class 4.1 ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment |
| NEBS | SR-3580 NEBS Criteria Levels (Level 3 Compliance) GR-63-CORE: NEBS, Physical Protection GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant) GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) |
| Telecomm Compliance | T1 and XDSL Interfaces FCC Part 68 (T1 Only) Industry Canada CS-03 JATE Green Book E1 Interface TBR 12/13 ACA TS016 G.703 RTTE Directive 1995/5/EC Device management: NETCONF, CLI, SNMP v1/v2/v3 End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS) Device and service-level fault management Device and service-level performance management |
| Metro Ethernet Forum (MEF) | MEF CE2.0 compliant |
[/specifications]
Juniper ACX-MIC-16CHE1-T1-CE Modular Interface Card
Juniper ACX-MIC-16CHE1-T1-CE is a 16-port channelized T1/E1 Modular Interface Card designed for the Juniper ACX4000 Series. It supports channelized E1 connectivity down to DS0 through an RJ48 interface, making it suitable for metro and access network deployments that require flexible circuit-based service delivery. This MIC is supported on Fortius-M only.
